1.25G SFP Optical Transceiver with DDM mornitor

FEATURES:

l       Up to 1.25Gb/s data links

l       Hot-pluggable SFP footprint

l       1310nm Fabry-Perot laser transmitter

l       Duplex LC connector

l       Compliant with SFP MSA and SFF-8472

l       Digital Diagnostic Monitoring(DDM):Internal Calibration or External Calibration

l       Very low jitter

l       No Rate Select input required for

Fiber Channel 1x/2x Operation

l       Up to 20km on 9/125μm SMF

l       Metal enclosure, for lower EMI

l       Single 3.3V power supply

l       Low power dissipation <700mW typical

l       CWDM is also Available

l       Class 1: FDA/IEC60825-1 Laser Security

APPLICATIONS:

l       Gigabit Ethernet

l       1x Fiber Channel

l       Switch to Switch interface

l       Switched backplane applications

l       Router/Server interface

l       Other optical transmission systems

Description:

BDTRP413L1SD-20 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).They comply with laser safety standard IEC-60825 and Ethernet standard IEEE802.3z 1000Base-LX/LH and IEEE802.3ah.

The transceiver consists of two sections: The transmitter section incorporates a FP laser. the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA).

All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable.  Tx Fault indicates that degradation of the laser. Loss of ** (LOS) output indicates the loss of an input optical ** of receiver. The SFP module can be compatible with other brand switch devices like Cisco,Huawei etc.The SFP module has the function of AGC (Automatic Gain control without attenuator).

Optical Characteristics (TOP = 0 to 70℃, VCC = 3.00 to 3.60 Volts)